We've been a big fan of Openbeam for a long time, and when Terence Tam started producing 3D printers using this material, we were hopeful that this would be a great fit for his operation. Nice material, great engineering - what could go wrong? LOTS. Follow his spiral down the Asian rabbit-hole when his selected […]
BEP Documentation Correction... part 2!
Dave Hrynkiw
February 19, 2002
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
MORE POSTS
Phones Are Back Up
The maintenance was short and sweet, phone connection is restored, please feel free to call!
Sumovore Captures 1st at NAIT
From the BEAM mailing list, we're happy to report that Tom Gray managed to win 1st at the NAIT robotics challenge in Edmonton!: "Thanks again to all who endured my wails and made helpful suggestions earlier this year when I couldn't get my BS2 brained Sumovore to run. " "Grant M. of Solarbotics finally traced […]
Solarbotics at the MAKER FAIRE
We are going to be at one of the two coolest shows on earth, the San Francisco Bay Area MAKER FAIRE! (The other coolest show is the Austin version!) So we are packing up shop and heading down to beautiful California where it's warm and not snowing! If you are in the area, have a […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.