We have proof. Jeremie uses up these deodorant sticks, and does stuff with them:
BEP Application #4 - The BBPV
Dave Hrynkiw
March 4, 2003
We've churned out another Bicore Experimenter's PCB project: The "Bare Bones PhotoVore". This is an elegant little circuit, which offers the functionality of a basic photovore (with tactiles) all on a very simple circuit.
Ours is solar-powered by a Miller Solarengine, but if you wanted to build one with a battery, your parts count would only be six parts (well, seven if you include a power switch)!
MORE POSTS
New Products!
We've been busy gathering new BEAM products, and now with the release of the new website engine, we're able to finally post them! New: CP.047F - 0.047F 5.5V capacitors CP10F - 10F 1.6V capacitors (return of an old favourite!) MCM2 - a new metal cassette mechanism with very cool parts VPM - a tiny disk […]
New Wheels
Remember those bad-boy wheels you saw on Strongbad? Well, they're now available! But be warned - we don't have the sleeve to fix the 2mm shaft to 1/8" hole diameter gap, so you'll have to improvise something yourself. Otherwise, your robot will have a bit of a lope to its roll!
New GM11-14 mounting screws
BOY those are strange little screws on the face of the GM11-14 series of gear motors! 1.7mm diameter x 0.35mm thread pitch ain't a common bolt, but we found some 4mm long that we've made available for those of you looking for a precision method of mounting the motors. Check out part M1.7x0.35!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.