Well, we missed out on spring, but summer is finally here and it is hot! And that means we have fireworks, mosquitoes, green stuff on trees, bunnies and sparrows, air conditioning, donuts, lasers, er... that is year round. That’s why today we have some thunder clouds in order to provide some cooling, laser bent wood […]
Back on Track
Dave Hrynkiw
June 25, 2013
Hey everyone, while parts of Calgary are still in recovery, things are now back to normal on our end. We're processing and shipping out on schedule, and unless you're in a flood-affected area you'll be receiving your order on time. Thanks for your patience!
MORE POSTS
Oomlout - Solarbotics Edition!
Good news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit. Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing […]
Canada Post Service Interruption
Canada Post orders will not be shipping today due to the issues with some of their online tools. We apologize for inconvenience.
Project: Switching Beds for a Better Cut
We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.