Ok, ok - we've been getting requests (no; more like demands) that we offer a bit of a deal for getting the GM15's in pairs. Alright then. How does $30USD or $40Cdn a pair strike you? Ok, now let's see some nano-sumo robots! "Wot's this? A microcontroller at Solarbotics??" Yup. The Atmel ATMega8L is part […]
Austin Maker Faire 2008
Dave Hrynkiw
October 17, 2008
It's that wonderful time of year when you can see your breath in the air while you wait at the bus stop. Frost decorates the blades of grass, motorists spend five minutes scraping ice off the windshield before departing and there are hints of snow when you look up at the hills. So what's a better way of coping with the change of season than by heading down to Texas, where it's twice as warm and there's nothing but sun in the forecast? That's right - this weekend we're at the 2008 Austin, Texas Maker Faire!
From the official site:
Maker Faire is a two-day, family-friendly event that celebrates the Do-It-Yourself (DIY) mindset. It's for creative, resourceful people of all ages and backgrounds who like to tinker and love to make things. So much to see, you will need 2 days to see it all!
Come look for Dave or Cheryl, who'll be helping out those fine Maker folks in their store. You'll be able to pick up a few of our kits in person and even get a sneak-peak at what we're working on for the upcoming holiday season.
Drop by and check it out - there'll be tons of exhibits, eclectic projects, activities and more! It'll take place October 18 & 19 at the Travis County Expo Center - you can go to www.makerfaire.com for more info.
And don't worry - some of us are privileged enough to stay behind with the bare trees, grey clouds and nippy wind, so business will go on as usual at Solarbotics HQ.
MORE POSTS
2002 LANL Workshop in the works...
Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop). Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the […]
Friday New Product: Brackets, Power Jack...
Woooo, new stuff, finally here! OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack $1.90 T-shaped joining plates for all your OpenBeam creations! OpenBeam L Joining Plate, Anodized Aluminum - 2 Pack $1.90 L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles. 5.5-2.1mm DC Power Jack - Female […]
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.