So it turns out that we've underestimated the email services of the world. This has led to frustrations for some of our loyal users in reclaiming their email with the new website. We're sorry people. Completely our bad on that one. The good news is that testing so far shows that the issues should now […]
Arduino Uno and Neeeew York City!
Dave Hrynkiw
September 29, 2010
We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too.
One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the Arduino "UNO" which we now have in stock, along with the upgraded Arduino Mega 2560. Here (in short) are the principle differences between the Duemilanove and the new Uno:
- It uses the same microcontroller as before, but is on a new re-branded board ("Uno") with slicker packaging & graphics. Oh, and a logo too!
- The pin lables are a bit tighter, and better show how they are used (hardware PWM is marked with a "~")
- Stickers! And neat paperwork explaining warrantee, how it was made and tested, and how each purchase helps protect a 1/2 square meter of Madagascar forest. Cool.
- CE / FCC certification. This is an important one, which assures electronics performance & noise control. Not an inexpensive proposition - kudos on getting this certification!
- Smaller bootloader - gives you more space for code for sketches!
- Better 3.3V regulator on board (old 3.3V came from FTDI chip, which was a bit wimpy)
- MOST IMPORTANT CHANGE: Replacement of the FTDI USB/TTL interface chip with an ATmega8U2 microcontroller. It's apparently cheaper, faster and definitely a whole lot more flexible. There's even a separate ICSP header on the UNO to let you reprogram this second microcontroller to make your Arduino UNO appear to be something vastly different USB device to your operating system.
The Open Source Hardware Summit was a busy day (went by very quick) and in general was quite well attended. Practically all the rock-stars of the genre were there, and all the talks were well worth the price of admission. We were happy to put our sponsorship behind an event of this quality, as it brought out very interesting discussions. I won't delve too deep into it here - view the archived video of the event, and see for yourself!
MORE POSTS
Remember the GM5?
Hoped you ordered one while you had the chance - they're all gone now! I will most likely be a looong time before these come back, so please don't contact us asking for more - it was a rare deal for Solarbotics, which we were glad to bring to you for as long as it […]
Minor Additions and New Links
Boy, there's work to do on new websites. Link checking, spell checking, image links - all sorts of crap that doesn't have anything to do directly with robots! Even so, we've been able to put up a few new images of Mark Tilden's "Projectorbots" on the Photovores page. Yuck. Must do something about how hard […]
2003 LANL Workshop
We've got the official "OK" to open up registration for the 2003 LANL BEAM Workshop in Los Alamos, New Mexico. The 3-day workshop is from May 1-3, with the 1-day following on May 4. Check it out at any of the following links: Direct IP link (until the following DNS entries echo through the web) […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.