As Panasonic is no longer manufacturing their line of Sunceram solar cells, we've been on the hunt for suitable replacements. Here's our first find - the SCC3733! It's a polycrystaline cell in an epoxy casing, so it's a bit heavier, but much, much less prone to breaking or burning off of the solder-pads. It's also […]
Arduino Uno and Neeeew York City!
Dave Hrynkiw
September 29, 2010
We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too.
One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the Arduino "UNO" which we now have in stock, along with the upgraded Arduino Mega 2560. Here (in short) are the principle differences between the Duemilanove and the new Uno:
- It uses the same microcontroller as before, but is on a new re-branded board ("Uno") with slicker packaging & graphics. Oh, and a logo too!
- The pin lables are a bit tighter, and better show how they are used (hardware PWM is marked with a "~")
- Stickers! And neat paperwork explaining warrantee, how it was made and tested, and how each purchase helps protect a 1/2 square meter of Madagascar forest. Cool.
- CE / FCC certification. This is an important one, which assures electronics performance & noise control. Not an inexpensive proposition - kudos on getting this certification!
- Smaller bootloader - gives you more space for code for sketches!
- Better 3.3V regulator on board (old 3.3V came from FTDI chip, which was a bit wimpy)
- MOST IMPORTANT CHANGE: Replacement of the FTDI USB/TTL interface chip with an ATmega8U2 microcontroller. It's apparently cheaper, faster and definitely a whole lot more flexible. There's even a separate ICSP header on the UNO to let you reprogram this second microcontroller to make your Arduino UNO appear to be something vastly different USB device to your operating system.
The Open Source Hardware Summit was a busy day (went by very quick) and in general was quite well attended. Practically all the rock-stars of the genre were there, and all the talks were well worth the price of admission. We were happy to put our sponsorship behind an event of this quality, as it brought out very interesting discussions. I won't delve too deep into it here - view the archived video of the event, and see for yourself!
MORE POSTS
We want Your Input!!!
We are working on fixing the bugs in the website, along with a number of other improvements. Some of you may already know that we are rewriting the ordering portion, making processing your BEAM needs that much easier. It is approaching it's release very quickly, we are just doing the final testing now! So give […]
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Solarbotics Holiday Hours
Solarbotics will be closing for the winter holidays as of Tuesday, December 24th. We will be open again December 30, 2002.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.