They make neat things. Like wheels that fit the 3mm "D" shafts on GM11a/12a/13a/15a/18 gear motors. And super-cool motor mounts. This stuff is so neat, that we're selling it now. 32x7mm Fine wheels 42x19mm Fat wheels Standard Mini Metal Motor Mount Extended Mini Motor Motor Mount Oh, did I mention that the MAKER Faire: Austin […]
Arduino Uno and Neeeew York City!
Dave Hrynkiw
September 29, 2010
We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too.
One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the Arduino "UNO" which we now have in stock, along with the upgraded Arduino Mega 2560. Here (in short) are the principle differences between the Duemilanove and the new Uno:
- It uses the same microcontroller as before, but is on a new re-branded board ("Uno") with slicker packaging & graphics. Oh, and a logo too!
- The pin lables are a bit tighter, and better show how they are used (hardware PWM is marked with a "~")
- Stickers! And neat paperwork explaining warrantee, how it was made and tested, and how each purchase helps protect a 1/2 square meter of Madagascar forest. Cool.
- CE / FCC certification. This is an important one, which assures electronics performance & noise control. Not an inexpensive proposition - kudos on getting this certification!
- Smaller bootloader - gives you more space for code for sketches!
- Better 3.3V regulator on board (old 3.3V came from FTDI chip, which was a bit wimpy)
- MOST IMPORTANT CHANGE: Replacement of the FTDI USB/TTL interface chip with an ATmega8U2 microcontroller. It's apparently cheaper, faster and definitely a whole lot more flexible. There's even a separate ICSP header on the UNO to let you reprogram this second microcontroller to make your Arduino UNO appear to be something vastly different USB device to your operating system.
The Open Source Hardware Summit was a busy day (went by very quick) and in general was quite well attended. Practically all the rock-stars of the genre were there, and all the talks were well worth the price of admission. We were happy to put our sponsorship behind an event of this quality, as it brought out very interesting discussions. I won't delve too deep into it here - view the archived video of the event, and see for yourself!
MORE POSTS
Bye Becky - Welcome Robin!
We're sorry to see Becky go off to work with her husband on their own endevours, but that's ok; we have Robin now - a most worthy replacement. Bye Becky - we'll miss you! Come back sometime and say hi to Robin, ok?
Thursday Cool Links
Well, it looks like we somehow managed to walk away from the Maker Faire unscathed. Going to the beach afterwards, though, has left us with some residual sunburns to suffer through. Thankfully, we got to return to some local weather that is wet, grey, and generally miserable. But enough of that! On with some neat-o […]
LMR Start Here Kit, Beetlebot Preorders
Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.