Solarbotics Ltd. is pleased to announce the re-unveiling of Solarbotics.net. Solarbotics.net is a BEAM Community Server that we, at Solarbotics are proud to sponsor. Our involvement with Solarbotics.net is as a hardware sponsor - we are providing the server hardware and the bandwidth for this project. It is being managed at arm's-length by Eric Seale, […]
Arduino Uno and Neeeew York City!
Dave Hrynkiw
September 29, 2010
We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too.
One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the Arduino "UNO" which we now have in stock, along with the upgraded Arduino Mega 2560. Here (in short) are the principle differences between the Duemilanove and the new Uno:
- It uses the same microcontroller as before, but is on a new re-branded board ("Uno") with slicker packaging & graphics. Oh, and a logo too!
- The pin lables are a bit tighter, and better show how they are used (hardware PWM is marked with a "~")
- Stickers! And neat paperwork explaining warrantee, how it was made and tested, and how each purchase helps protect a 1/2 square meter of Madagascar forest. Cool.
- CE / FCC certification. This is an important one, which assures electronics performance & noise control. Not an inexpensive proposition - kudos on getting this certification!
- Smaller bootloader - gives you more space for code for sketches!
- Better 3.3V regulator on board (old 3.3V came from FTDI chip, which was a bit wimpy)
- MOST IMPORTANT CHANGE: Replacement of the FTDI USB/TTL interface chip with an ATmega8U2 microcontroller. It's apparently cheaper, faster and definitely a whole lot more flexible. There's even a separate ICSP header on the UNO to let you reprogram this second microcontroller to make your Arduino UNO appear to be something vastly different USB device to your operating system.
The Open Source Hardware Summit was a busy day (went by very quick) and in general was quite well attended. Practically all the rock-stars of the genre were there, and all the talks were well worth the price of admission. We were happy to put our sponsorship behind an event of this quality, as it brought out very interesting discussions. I won't delve too deep into it here - view the archived video of the event, and see for yourself!
MORE POSTS
Active Sale!
Spending more time by yourself... indoors... away from other people? Great time to pick up some Fluke meters & supplies that you don't wipe your tush with (and if you do, ewww.) Check out our Sale flyer - it's on until March 28!
Sausage Roll for Sale!
Here at Solarbotics, we like to eat well. So, unfortunately after leaving a forgotten sausage roll in the microwave for several days we must search for a means of disposal and/or obvious prank to pull. Our immediate reaction was to place the rather stale pastry in the mouth of our office chimp, Herb. But now […]
New Site!
Welcome to the new Solarbotics Website! We've been busy whipping Kenny the Web-boy with various types of wet noodles (use Fettuccini - heavier!) to get this new and improved site up to snuff. This year, we've moved the site to 100% ASP (yes, I hear the "boos" from the Linux camp over in Minnesota), which […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.