Question: What ever happened to punch cards? Nobody really knows, but the world became a much much darker place without them. There was something undeniably magical about making a computer do your bidding through feeding it a piece of paper with a bunch of holes in it ("THE ULTIMATE POWER IS MINE! I CAN NOW […]
Arduino Uno and Neeeew York City!
Dave Hrynkiw
September 29, 2010
We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too.
One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the Arduino "UNO" which we now have in stock, along with the upgraded Arduino Mega 2560. Here (in short) are the principle differences between the Duemilanove and the new Uno:
- It uses the same microcontroller as before, but is on a new re-branded board ("Uno") with slicker packaging & graphics. Oh, and a logo too!
- The pin lables are a bit tighter, and better show how they are used (hardware PWM is marked with a "~")
- Stickers! And neat paperwork explaining warrantee, how it was made and tested, and how each purchase helps protect a 1/2 square meter of Madagascar forest. Cool.
- CE / FCC certification. This is an important one, which assures electronics performance & noise control. Not an inexpensive proposition - kudos on getting this certification!
- Smaller bootloader - gives you more space for code for sketches!
- Better 3.3V regulator on board (old 3.3V came from FTDI chip, which was a bit wimpy)
- MOST IMPORTANT CHANGE: Replacement of the FTDI USB/TTL interface chip with an ATmega8U2 microcontroller. It's apparently cheaper, faster and definitely a whole lot more flexible. There's even a separate ICSP header on the UNO to let you reprogram this second microcontroller to make your Arduino UNO appear to be something vastly different USB device to your operating system.
The Open Source Hardware Summit was a busy day (went by very quick) and in general was quite well attended. Practically all the rock-stars of the genre were there, and all the talks were well worth the price of admission. We were happy to put our sponsorship behind an event of this quality, as it brought out very interesting discussions. I won't delve too deep into it here - view the archived video of the event, and see for yourself!
MORE POSTS
Kyle on Discovery TV
Kyle Simmons has been very busy lately, particularly being on TV! If you're getting the Canadian Discovery Channel, check him out tonight on 'Daily Planet' (22 minutes into the program). Hmmm.... nice kits you're featuring there! For those of you who missed it, EXN.CA has the clip online! Read More...
PDXBot Video
We just received an inventory of PDXBot.04 DVDs that we're selling in part to raise funds for the Portland Area Robotics Society (PARTS). It's a pretty hefty video - over 2 hours long, with many features, including a few cameos of "The Dave and Grant Show" (we were there competing last year). It's a good […]
New Vibe Motors!
We've finally come upon a suitable replacment for the venerable, discontinued VPM vibrating pager disk motor. Ah, it was a splendid device, but it sure was easy to break those motor leads... Ah! But the new VPM2 has wires prebonded to the motor, and it's slightly smaller too! We welcome our new vibrating disk motor […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.