Want a bumble-bee look to your robot tank? Intersperse our new GMT-Yellow treads into the link chain! You should even be able to use a yellow link as a opto-reflector in a wheel (err...tread?) encoder circuit. ALSO, we're the only place in North America you can get these new yellow tread links!
APA102-2020 MicroNova Custom LED Choker
Solarbotics Ltd
February 23, 2018
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.
Photo by Yeti, edited by Batgirl
These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.
This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!
Reason for a Choker necklace:
Hats have been done, shoes have been done, pendants have been done. This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.
The Build:
I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.
The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.
A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.
Epoxy locks the switch and wires in place.
The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.
I used elastic thread to attach the LED strip and components to the necklace. A heavy duty needle was all that was needed to punch through the (imitation) leather belt. Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.
Operation:
When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".
Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.
Video of the Collar in Action
MORE POSTS
EZ-B Wall-E, Even More New Stuff
So last week we put the EZ-B Robot Controller Suite up for sale, and what appears up on Hack A Day not long after that? This impressive modified Wall-E that has a built-in camera, voice recognition, and object tracking. And what does it use to control the whole show? That's right, an EZ-B. This would […]
SunSwinger Documentation online
We just got the PDF documentation up for the SunSwinger, so you'll see it listed as a resource under the SunSwinger product info page. Hope you all enjoyed April Fool's. The Spazovore was only a partial joke - anybody who ordered one will be receiving one!
MakeFashion 2014: Inputs and Outcomes
So what happens when Solarbotics meets up with a local fashion duo just 4 weeks before a techno fashion show? Some insanity. Some long hours. Lots of fun. Solarbotics helped several designers prepare for the MakeFashion Gala 2014, but there were a few we really worked closely on for the event. Pumping Fashion Lit by […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.