Ok, yes, we know. This is yet another late cool link post, but... We have a good excuse, honest! We just got in a second laser (from Full Spectrum), and we were distracted for most of yesterday getting it up and running. So enough excuses - here's this week's batch of links: PVC Instrument, DRS […]
APA102-2020 MicroNova Custom LED Choker
Solarbotics Ltd
February 23, 2018
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.
Photo by Yeti, edited by Batgirl
These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.
This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!
Reason for a Choker necklace:
Hats have been done, shoes have been done, pendants have been done. This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.
The Build:
I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.
The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.
A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.
Epoxy locks the switch and wires in place.
The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.
I used elastic thread to attach the LED strip and components to the necklace. A heavy duty needle was all that was needed to punch through the (imitation) leather belt. Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.
Operation:
When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".
Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.
Video of the Collar in Action
MORE POSTS
Valentine's Day, New Book
Ahoy mateys! Erm, perhaps an "Ahoy darlins!" would be more appropriate, due to the rapid advance of Valentine's Day. Yup, the 14th of February is only two-and-a-half weeks away. That means it's time to hunker down and get a certain something for that certain someone. And what better way to tell The Significant Other that […]
Basic Stamp 2 Sumovore code
For those of you with the Basic Stamp 2 addition* to the Sumovore here is some Code to get you started. You will need to download the Editor from Parallax to load and edit the code. *The BS2 add on board will be up for sale very soon
Odds and ends
Greetings, ye fine fellow travelers of yon internet. This week you'll find that we have three new and completely unrelated items to show off: 17010 3-AA Battery Holder - This three-cell holder has 9V-style snap connectors, and can create 4.5V with Alkaline batteries. 17390 Tact Switch - A push-button style switch that's compact, inexpensive and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.