Low-Profile MicroSD Card Adapter
USD $5.95
Have an SD card that just seems to protrude from your project or application? Well, why not shorten things up by using a microSD card with this Low-profile adapter.
DESCRIPTION
Probably the most popular application for this adapter is the Raspberry Pi® board but we'll leave it to you to find more products to fit this into. It's approximately half the length of an SD card and 5.5mm thick so depending on the product this is going into the housing may need a bit of modification in order to fit. We tested it with our Raspberry SAFE and it installs very nicely in it, no modding necessary, and the microSD only sticks out 3mm from the Pi Board.
The microSD slot is a push-in, push-out holder and be aware that if you are removing a card close to your eyes it has quite a lot of action and can shoot your card back at you very quickly so wear safety glasses or just don't eject the card near your face! Here's a link to demo video of this adapter in action.
Please note: MicroSD card not included.
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.003 kg |
|---|---|
| Dimensions | 3.5 × 3 × 0.8 cm |
REVIEWS
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.