PhidgetLED-64 Advanced
USD $78.00
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled.
DESCRIPTION
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brightness controlled from 0 to 100% within that limit using current control. These LED outputs can also be used to interface other devices that benefit from current control (such as buzzers, fans, and other small, simple electronics).
Most standard LEDs have forward voltages below 2.75 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board output. The forward voltage will default to 2.75V, and the maximum current defaults to 20mA.
Comes packaged with:
- Hardware mounting kit (4 nuts and bolts (M3), 4 plastic spacers)
Specifications:
- Current Consumption 70 mA
- Supply Voltage 6~15VDC
- Selectable Output Voltage Levels 1.7, 2.75, 3.9, 5.0 VDC
- Output Current Limit Max (Per LED) 80 mA
- LED Current Limit Max 80 mA
- LED Current Limit Resolution 1.3 mA
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.25 kg |
|---|---|
| Dimensions | 8 × 12 × 2 cm |
| Ecosystem |
REVIEWS
Related products
-
Solarbotics Sumovore Mini-Sumo
USD $98.50 SKU: K SVSelect options This product has multiple variants. The options may be chosen on the product page
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.