Sparkfun Pro Mini 328 - Compatible with Arduino - 5V/16MHz
USD $11.49
You need to wedge an Arduino into a really tiny spot? Simple - just use a SMD '328 IC. Oh... you want a reset, and voltage regulator too? Why didn't you say so!
DESCRIPTION
The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors!
Try this - the super-flat SparkFun Arduino Pro Mini, featuring a full 5V design running a ATMega328 at 16MHz. Mind you, there's no headers and USB interface - you have to wire it up yourself, and have an offboard USB-serial cable to program it with!
Features
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- USB connection off board
- Supports auto-reset
- 5V regulator
- 150mA maximum output
- Over current protected
- Reverse polarity protected
- DC input 5V up to 12V
- On board Power and Status LEDs
- 18x33mm (0.7" x 1.3") footprint
- Analog Pins: 8
- Digital I/Os: 14
- Weighs less than 2 grams! (0.07oz)
Note: Unlike most other Arduino development boards, this one has the USB connection off board.
Links
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.003 kg |
|---|---|
| Dimensions | 5 × 3 × 1 cm |
| Ecosystem |
REVIEWS
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.