Gear Motor Tread Idlers
USD $2.25
Idler wheels for the GMT tread links
DESCRIPTION
You only need one motor per side on a tracked vehicle, but you'll need at least one idler wheel to stretch the tread between two points on your robot!
This idler matches the same dimensions as the driver cog (38mm diameter x 15mm wide), but is drilled out to 1/4" (6.4mm), which lets you use a standard #8 bolt as the idler axle.
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.01 kg |
|---|---|
| Dimensions | 3.7 × 3.7 × 1.5 cm |
REVIEWS
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.