Just another quick note that Solarbotics will be closed for Victoria Day, Monday May 23. Any orders received after 2pm today will not go out until we open back up on Tuesday the 24th.
We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.
Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:
We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.
Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.
Now take a look at our new cleaned and re-slatted table! It's almost too clean...
As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!
Using the laser to laser parts for the laser... for better lasering...
Here are the results:
With this in place, we're ready for even higher quality laser cutting.
Just another quick note that Solarbotics will be closed for Victoria Day, Monday May 23. Any orders received after 2pm today will not go out until we open back up on Tuesday the 24th.
Solarbotics in Canada Computes! We were recently interviewed for an article in the widely-read (well, in Canada anyways) Computer Paper publication. Probably nothing you already know, but we like to toot our own horn. Read More...
We have been working hard on our new front end to improve your Solarbotics experience, but being the people we are we always want to know more! Tell us what you think at our new Comments page!
Happy First Week of September everyone! The kids are all back in school and there's that certain holiday right around the corner. Apparently Labour Day celebrates "the economic and social achievements of workers." And what a better way to celebrate than to not work! That's right - on Monday, September the 7th Solarbotics and HVW […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.