LMR Start Here Kit, Beetlebot Preorders

Dave Hrynkiw
May 29, 2010

Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome stuff. Like what, you ask?

LMR Start Here KitIf none of you have ever checked out Let'sMakeRobots.com, you're missing out. This is a fabulous community of robot builders - there are always plenty of neat ideas being worked on, totally worth investigating. Like, for example, the Start Here project. This is great for anyone seeking to make one of their first robots with a degree of complexity. Frits has done a fantastic job of laying out the steps, complete with photos and descriptions.  We're proud to announce a partnership with LMR where you can purchase all the parts to build this kit right here, and we'll donate 10% of the proceeds directly to LMR for maintaining their site and building the community.

BeetlebotIn other news, we are, finally, so very close to releasing the long awaited BeetleBot.  It made its debut at the Maker Faire, and now we're just putting our finalizing touches on it for a full release. We're so close, in fact, that we're accepting pre-orders. Follow the above link (or click on the image) to go to the product page. Don't forget to choose your theme - there are four colours for each of the good and evil versions, so choose wisely! If all goes well, we hope to be shipping these orders out during the coming week.

MORE POSTS

February 25, 2002
2002 LANL Workshop in the works...

Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop). Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the […]

June 26, 2012
Original Robosapien Prototype

Well, we're all back from Maker Faire, feelin' pretty groggy but fairly alive (or, perhaps more accurately, undead - something about being in a zombie-like state sounds about right). So to break the recent drought of news posts, we've dug out a treat from the deeper regions of the Solarbotics server archives. This is some […]

April 4, 2013
Solarbotics is, um.. out of power...

There's a power failure in our area this morning, so what to do... Hey, let's take the staff out for breakfast! So since the phones are down, the server is down, the lights are out, and there's a sticky-note on the front door saying as much, we're not open. Not for another hour or two, […]

February 9, 2011
Interesting Mini-sumo build

This mini-sumo design by Jeremy Bloyd-Peshkin features our wheels, and one of our favourite building materials, Sintra. We can't laser-cut sintra (PVC=bad stuff when burned), but milling it works well, as this builder shows. The asymmetric motor layout works, as proven by this contest-winning design (scroll to the bottom of the page).

1 2 3 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart