Hey, we survived MakerFaire, now we got new challenges. Good weather is one of them. But the internet can help. Stay put, there's nothing to see out there. The outdoor reality doesn't blink, pan or murmur, or at least not as often as those links below: Stryfe Motor Replacement! A wicked nerf gun mod - […]
New Product: WeMos
Solar botics
February 23, 2018
|
WeMos D1 Mini - 4MB Microcontroller $9.85CAD / $7.95USD The WeMos D1 Mini makes working with the ESP8266 module simple! Breadboard compatible and equipped with a microUSB jack, build your next Internet of Things project in a snap. |
 |
ProtoBoard Shield for WeMos D1 mini $4.39CAD / $3.50USD A prototyping area that comes with headers you can solder on for easy connection to any WeMos D1 Mini project. |
 |
Double Socket Dual Base Shield for WeMos D1 Mini NodeMCU $4.39CAD / $3.50USD Double up the possibilities of your WeMos D1 Mini projects with this dual base shield. |
 |
Matrix LED Shield V1.0.0 for WEMOS D1 mini ESP8266 development board $4.50CAD / $3.49USD Here's a cool 8x8 LED Matrix Display designed specifically for a WeMos D1 Mini! |
 |
DC Power Shield V1.1.0 for WEMOS D1 mini 7-24V 1A $4.50CAD / $3.49USD Here is a perfect power supply shield for those projects that can use a wall wart! |
 |
X-Relay 5V Relay Shield Version 2 for WEMOS ESP8266 WiFi Mod $8.10CAD / $6.25USD Single channel relay for ESP8266 and ESP32 modules. |
 |
WS2812B RGB SHIELD for WeMos D1 mini $3.00CAD / $2.49USD This is the easiest way to connect a WS2812 LED to a Wemos D1 Mini! |
MORE POSTS
Question: If a rabbit laid an egg, would...
Answer: If it was a chocolately Easter Egg, yes! Yes, quite possibly that was the worst segue of the season, but moving on... Solarbotics will be closed on Friday April 14, 2006 for the Easter long weekend. We will be open on Monday, April 17, 2006 and all will be business as usual.
Wednesday Cool Links: Lotsa Arty Stuff
Ok, yes, we know. This is yet another late cool link post, but... We have a good excuse, honest! We just got in a second laser (from Full Spectrum), and we were distracted for most of yesterday getting it up and running. So enough excuses - here's this week's batch of links: PVC Instrument, DRS […]
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.