New RoboSapien Tech...

We've got an inventory in of treads, cogs, and idlers that mate up with our GM2/3/8/9 gear motors! You wanna build a photovore or Herbie with attitude? Get at it! You may want to pay special attention to the GMTPkg tread deal. It includes a pair of GM2/3/8/0 style gear motors, so you're ready to […]

Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]

It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.

Today we proudly present not ONE, but two products! Mind-blowing stuff... So impressive... Well, if someone didn't beat me to the The Northern Lights Bundle yesterday, we would've had three... Solid State Relay SSR-10DD 10A/5-60VDC 3-32VDC $10.00 Traditional relays actually have physical little contacts that when powered by a little signal, bang together to pass […]