Seeed Grove - Digital Light Sensor $9.90 This module is based on the I2C light-to-digital converter TSL2561. Grove - DMX512 $4.90 Interface Grove to DMX512 for control of stage lighting and effects. Grove - Temperature & Humidity Pro Sensor $14.90 For more precise environmental measurements using the Grove system. Grove - Recorder $17.95 Grove record […]
Closed for Thanksgiving (Monday October ...
Dave Hrynkiw
October 11, 2014
Being in Canada, October is practically the doorstep of winter. Some places get a full three months of autumn, but for us it's one big multicolored blur before everything gets covered in white. Sure, that means that winter takes up half the year. But do you know what it also means? Thanksgiving comes almost a month earlier than it does for our Yankee pals to the south.
So how do we express how much it means to us that this holiday comes so soon? We take a day off, of course. That's right, Solarbotics will be closed on Monday, October 13th, 2014 so that we can celebrate our gratitude for having an early Thanksgiving.
That's right. This Thanksgiving, we're thankful for Thanksgiving. We're hoping this will cause a continuous feedback loop of statutory holidays, but we'll let you know how it goes.
MORE POSTS
Diodes, Trimpots
Happy October everyone! The leaves are falling and there's that crisp scent of winter lurking in the air. Ah, it sure is beautiful! And you know what else is beautiful? Diodes and trimpots, of course. Check out these gorgeous new components: 3.4V Zener Diode 5.1V Zener Diode 1k Single-Turn Trimpot w/ Knob 10k Single-Turn Trimpot […]
New Treads...nummy!
We've got an inventory in of treads, cogs, and idlers that mate up with our GM2/3/8/9 gear motors! You wanna build a photovore or Herbie with attitude? Get at it! You may want to pay special attention to the GMTPkg tread deal. It includes a pair of GM2/3/8/0 style gear motors, so you're ready to […]
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.