The Solarbotics Useless Box has been featured on this week's Show and Tell at Tested!
Solarbotics is helping out local fashion designers prepare their e-wearables for the Calgary MakeFashion. This time, Tony Grimes dropped in to experiment with his fiber-optic cloth from SensingTex as an illuminating surface, but the included 5mm LED was not dazzling enough. Time to hack in our 3W RGB Star Controller! The plan was to shift the colors to change the overall color of the fabric, but is serendipitously didn't work. Shifting the optical pickup across the lens of the LED split the light from the individual red, green, and blue elements to to different strands of the fiber optic cloth, making for a wicked speckled rainbow effect.
Aaaand we have a few new things to show off before we wrap up this week.
35STH36 NEMA-14 Bipolar 40mm Stepper $16.00 This motor is about half as small as our NEMA-17 Stepper and as a result only needs about half the power. Compared to the other NEMA-14 stepper we carry, it's a little longer but has the option to mount an encoder to the rear shaft! |
|
Adafruit Monochrome 128x32 I2C OLED graphic display $17.50 These are tiny, sharp, and most impressive OLED monochrome displays! Just about 1" diagonal, made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. |
The Solarbotics Useless Box has been featured on this week's Show and Tell at Tested!
Temporary Tattoos to Monitor Vitals An lighter more wearable alternative to FitBit (Via Beautiful Decay) Laser-Cut Wood Illustrations Layering laser-cut wood taken to a whole new level, by Martin Tomsky (Via Colossal) Tiny V8 Engine Out of Paper Paper can be exceptionally sturdy, especially when strengthened by glue. By Aliaksei Zholner (Via Gizmodo) REM Detection […]
Ok, so tomorrow is apparently not a regular Friday, but a good one. I would say, that is a very honest thing to call it, because what else would you call a Friday that is a day off? Sure, it's good. So that's what we are doing on that day - being closed and away, […]
...oh, just save the Republic! Just got this note in from Rob Meyer, who is using 3 of our GM15 pager gearmotors to drive his 1/18 scale R2-D2. Given that the real R2-D2 measures 108cm tall, that makes this cute cousin only 6cm (2.36") tall! There's a GM15 for each of the drive wheels, and […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.