3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

January 28, 2009
Valentine's Day, New Book

Ahoy mateys! Erm, perhaps an "Ahoy darlins!" would be more appropriate, due to the rapid advance of Valentine's Day. Yup, the 14th of February is only two-and-a-half weeks away. That means it's time to hunker down and get a certain something for that certain someone. And what better way to tell The Significant Other that […]

April 29, 2003
New Gearmotors!

We're very excited to announce these new "baby" versions of the popular GM2 and GM3 gearmotors. These junior versions offer a 120:1 gear reduction ratio, built-in safety clutch, and 146rpm with 20in*oz torque at 5V drawing onlyh 90mA (620mA at stall). Take a look at them in the motors section of our website! The new […]

March 15, 2004
New Sanyo Gear motors

Wow! They're finally here! These are the original gear motors we used sooo many years ago to convert and power the Miniball kits (yes, they're under review for bringing back - don't rush us!). We're the only place to find the whole assortment of four gear ratios - 75.7, 134.5, 196.6, and 297.1:1 reduction, and […]

September 22, 2006
GM15s back in stock!

Sorry about the delay in making these available. These tiny 25:1 pager-sized gear motors are difficult to get built. BUT, we finally have more GM15 gearmotors in stock!

1 95 96 97 98 99 254
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart