Being in Canada, October is practically the doorstep of winter. Some places get a full three months of autumn, but for us it's one big multicolored blur before everything gets covered in white. Sure, that means that winter takes up half the year. But do you know what it also means? Thanksgiving comes almost a […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
LMR Start Here Kit, Beetlebot Preorders
Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]
Make:KW, New Catalogue
Well folks, it's that magical time where we give you some special insight into what's new n' happenin' in the world of Solarbotics. We'll start off by sending our congrats to everyone who participated in the recent Make:KW Arduino 201 meetup. We were proud to sponsor the event by donating some L298 Compact Motor Driver […]
Vancouver BEAM Workshop
Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.