Solarbotics went up to Edmonton, Alberta this last weekend to help out with the Northern Alberta Institute of Technology's Sumovore Mini-Sumo workshop/Robot Challenge/Open House, and to show off our wares. Give it a visit! Yes, yes, the Sumovore will be on sale for the first time tomorrow!
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
New Bundle: The Northern Lights!
Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
Christmas Holiday Schedule - 2019
With the holidays fast approaching we would like to announce our holiday schedule which is outlined below. When deciding how to ship your orders, please review the shipping estimates at checkout as some methods may not arrive before the beginning of the holidays!
Wednesday Cool Links: Theremin Goggles, ...
Shooting analog pictures, shooting bullets underwater, shooting… theremin noises from goggles, shooting… human-powered helicopters! if that doesn’t make any sense, see the links below: Steampunk theremin goggles A wicked build by [Sarah] - theremin steampunk goggles. Photo sensor will feel the amount of light and the slider would adjust the pitch of the sound produced. Check […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.