Well, we've found the ringleaders in this little impromptu telecommunications insurrection and took them out back, where we switched from our standard 'beat with a metaphorical hammer' to 'beat with an real hammer'. Which worked so well, actually, that our phones are now back up and behaving themselves. We can now take calls without any […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
New Product: Synapse & ESP
Synapse 220 Modules RF220SU SNAP Engine, 2 Mbps 2.4 GHz CAD40.43/USD29.95 WiFi is good, but the SNAP Engine Model RF220SU is an IEEE 802.15.4, low-power, very robust solution for embedded wireless control and monitoring networks. With auto-mesh networking (try that WiFi...). 2Mbps on the 2.4GHz spectrum and RP-SMA or U.FL selectable antenna. Synapse RF220UF1 CAD40.43/USD29.95 […]
What's on the burner...
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]
Spring Creality 3D Printer Sale - Let's ...
It's time to put away shovels, and clean up! We're making space in the warehouse, so we're moving out these big boxes of 3D printers! While supplies last, in-store only, final sale! Small, tidy, and lots of really good features - the Sermoon v1 Pro - 32% off! Super high detail printing with a Creality […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.