Monday May 24 is Victoria Day in Canada. We'll be using the old Queen's Birthday as an excuse to twiddle our toes in the grass and watch robots roam free. We'll be back to work Tuesday morning, bright and early!
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
DragonTail Robot Platform And A Dancing ...
Halloween is upon us, and it looks like everyone is testing out their costumes. For instance, the trees are dressing up (or down?) as Naked Trees, and all the leaves are dressing up as Multicoloured Dead Leaves. It's all very exciting. But we've keeping our heads down and churning out some great stuff to show […]
Circuit: L293D Mini-Sumo
This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
New Atmel Brainboard
Hi all! We've got a new revision of the Atmel Brainboard ready for you. It adds some more functionality, and removes the breadboard space to make it cleaner (but can be added back on via the expansion bus - will be announced shortly). Check it out!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.