Yes! We are quite busy preparing to the above said Entertainment Expo, that is going to take place on April 24-27 2014. Come by our booth(s), which are # 302 and 402, we are going to have lots of new exciting demos to show off. A few preview […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Review a Beetlebot, Other Tidbits
Whelp, it's just been one of those weeks. When the Calgary Stampede gets into full swing, things get a bit crazy. Fireworks, pancake breakfasts and BBQ lunches, cowboy hats, questionable choice in music ("We got both kinds - country AND western!"), and all-around crazy people. So it's fairly safe to say that we don't have […]
Friday New Product - Grove and RGB LED B...
Grove - 2-Coil Latching Relay $12.84 The Grove latching relays are interesting because they take a pulse to toggle their state, which it maintains even after a power cycle. GrovePi Starter Kit for Raspberry Pi $116.87 Carrying a GrovePi+ board together with 12 carefully selected Grove sensors with 10 pieces cables, this starter kit gets […]
Closed Monday for the holiday
Not sure what holiday it is, but my calendar says that nobody will be in on Monday "for the holiday". We'll be back to work Tuesday morning, promise!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.