3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

April 21, 2011
Closed Friday, April 21st.

Fun fact: The Friday before Easter used to be just like any other day of the week. But then they ('they' who? THE GREAT THEY, THAT'S WHO) decided that no, this Friday should be set apart from all the other Fridays of the year. So they tried attaching different names. First was Bad Friday, which […]

July 31, 2013
Wednesday Cool Links: Theremin Goggles, ...

Shooting analog pictures, shooting bullets underwater, shooting… theremin noises from goggles, shooting… human-powered helicopters! if that doesn’t make any sense, see the links below: Steampunk theremin goggles A wicked build by [Sarah] - theremin steampunk goggles. Photo sensor  will feel the amount of light and the slider would adjust the pitch of the sound produced. Check […]

March 20, 2017
The Solarbotics DIY Island & Repair...

What's the biggest event for Solarbotics in the spring? Calgary Comic Expo on April 27-30! This year we are going to be there as part of the DIY Island (booth 110) at BMO Centre, Calgary Stampede Park. DIY Island is a booth space shared between Solarbotics, Repair Oasis, Protospace and MakerFaire Calgary. Solarbotics will be […]

April 11, 2005
Sumovore Line-follower

This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...

1 31 32 33 34 35 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart