Yes! Phones refuse to work and we are currently beating them into submission with a complete trust in our victory over them. Also, just to let you know, we haven't fallen off the face of the planet, we are just very busy getting ready to the Calgary Comic & Entertainment Expo, which will take place […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Solarbotics at Calgary Entertainment Exp...
Yes! We are quite busy preparing to the above said Entertainment Expo, that is going to take place on April 24-27 2014. Come by our booth(s), which are # 302 and 402, we are going to have lots of new exciting demos to show off. A few preview […]
New Stuff!
We've been busy little elves at Solarbotics. New to our product listing is a fair number of parts and ICs that have been requested of us. Like what? Wellll...: You always need new chips. Especially when somebody on the BEAM list has made something cool: LM324 Op-amp (happy now, Bruce?) LM393 Dual comparator LM386 Audio […]
New BIOBug Footage
We've just recently been given the go-ahead to unveil more Wowwee BIOBugs - the toy that Mark Tilden had direct involvement in! This is footage we shot while down in New Mexico this Spring at the 2001 LANL workshop. The first video shows the BIOBug Beetle's ability to maneuver and respond to obstacles. The second […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.