3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

February 20, 2006
Monday closed for holiday

Hi!

September 13, 2005
Solarbotics Event Sponsorship

Brian Fields is heading up a new BEAM botting competition which Solarbotics is proud to be in association with. To borrow from the website: To enter this contest all you have to do is build the smallest robot you can in one of these three categories Turbot, Walker, or Photovore. This contest is much like […]

May 1, 2015
Friday New Product: Grove, Charger, Stro...

We are going to continue with some nice Grove products and mix it up with other bits and pieces. More sensors, a SparkFun LiPo charger, and some raw parts round out this session.

April 4, 2013
Solarbotics is, um.. out of power...

There's a power failure in our area this morning, so what to do... Hey, let's take the staff out for breakfast! So since the phones are down, the server is down, the lights are out, and there's a sticky-note on the front door saying as much, we're not open. Not for another hour or two, […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart