3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

September 13, 2005
SCC3733 Solarcell hacking

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]

March 21, 2014
Friday New Product: MaKey Deluxe, Tiny L...

New stuff! See? Here it is, in the neat little boxes below: MaKey MaKey - Deluxe Kit $59.95 You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey […]

March 21, 2018
Project: Experiments in Watermelon Filam...

It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.

December 18, 2014
Holiday Hours and Shipping

This is a quick note to announce our holiday schedule, which is going to be as follows: December 24 (Christmas Eve)- 9am to 12pm (half day) December 25 (Christmas Day) - offices are closed December 26 (Boxing Day) - offices are closed December 31 (The Day Before New Year's Day) - 9am to 12pm (half […]

1 22 23 24 25 26 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart