Due to the horrific events happening in the USA, Solarbotics cannot guarantee delivery of Priority or Airmail orders for the immediate future. Our sincerest sympathy goes out to the victims of this brutal and cowardly attack. May time relieve you of your sorrow, and the attackers face their justice.
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Project Monday: All-Seeing Eye
This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]
Pendulum project
It's really nice to receive pics of projects people have built out of our book "Junkbots". Here's one of the latest: the Pendulum by Christopher Pepe. Nice magnetic suspension mechanism! Read More...
Friday New Product: Galileo, Shift Level...
The new products are back! With more new products! Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit $19.95 Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit. Solarbotics I2C Shift Leveler $8.95 This little I2C adapter will have you shifting signals with ease […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.