3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

July 6, 2012
New Product Friday: Cowboy Touchscreens,...

It's once again Friday, and you know what that means - new stuff! And, on this particular Friday in Calgary "Cowboyland" Alberta, it's the start of the 100th Calgary Stampede. This is a pretty big deal, or so we hear, judging from the rampant "yee-haws" that are shouted into the July air with surprising frequency […]

December 6, 2012
New Bundle: The Northern Lights!

Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]

November 24, 2017
Solarbotics at Calgary Expo Holiday Mark...

If you are in Calgary & area this weekend, come see us at BMO Centre Expo Holiday Market. On November 25 & 26, 2017 we are going to be at booth 1314 with our new and all-time favorite gadgets.  The hours of the show are: Saturday 10-6, Sunday 10-5.

May 30, 2014
Friday New Product: Galileo, Shift Level...

The new products are back! With more new products! Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit $19.95 Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit. Solarbotics I2C Shift Leveler $8.95 This little I2C adapter will have you shifting signals with ease […]

1 20 21 22 23 24 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart