Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
"Steady as she goes, steersman..."
Solarbotics / HVWTech will be on "maintenance mode" while the bulk of the staff go down to the MAKE Faire in San Mateo, California. The remaining staff have begged for some relief to make the week go easier, so we are not going to be doing any UPS shipments until Monday, May 21. And don't […]
More of a Bug Hunt than a stand up fight...
So as some of you have noticed our new site went up yesterday, but unfortunately not without some issues. Today is a day of bug hunting, (which makes the Weyland-Yutani shirt I'm wearing even more appropriate) and thanks to the efforts of those of you who have taken the time to email me I've been […]
Free Mark Tilden Lecture at UWO
Remember that time when I was all like "This is totally the last post for the summer"? Well, I was just foolin'. Oh, those whimsical summer musings. No, instead we have another post for you. Today. Right now, in fact. This very post, even. It'll go something like this: Are near to London, Ontario? Do […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.