EDIT: Our wizards were successful and everything should be displaying properly now! Hi everyone, we've noticed that our website is having trouble with displaying images. We have our IT wizards working on it right now and should be back up and running like normal shortly! If you have any questions or concerns please email us […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Robothon Success!
Congrats out to Grant, for bringing his "Ender's Wraith" to first place in the advanced mini-sumo category at last weekend's Seattle Robothon. We also picked up an award for "Most Unusual Robot" with our Turbot prototypes! Additional to that, a Solarbotics Sumovore ("Oops" by Kristina Miles) won the amateur mini-sumo category!
BlinkM, LilyPad, SparkFun
A SparkFun PCB, three BlinkM LEDs, three LilyPads and a PICAXE USB Programmer walk into a bar. The bartender looks up and asks, "What is this, a newspost?" The answer to that question would be YES! Chekkit oot: SparkFun Ardubot Bare PCB BlinkM Smart LED BlinkM MaxM Ultrabright Smart LED BlinkM RGB Blaster LilyPad Temperature […]
Friday New Product and a Little Bit of F...
Solarbotics is helping out local fashion designers prepare their e-wearables for the Calgary MakeFashion. This time, Tony Grimes dropped in to experiment with his fiber-optic cloth from SensingTex as an illuminating surface, but the included 5mm LED was not dazzling enough. Time to hack in our 3W RGB Star Controller! The plan was to shift […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.