Today I have something truly fantasmic to show you. If you have something in your mouth, you should swallow now. If you're standing, sit down. If you're in your car, buckle up. If your mouth is full while you're standing up in your car and browsing the internet to read this... I just hope the […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
New Bundle: The Northern Lights!
Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
The 2004 Robotgames are over...
...and it was fun! Solarbotics was busy, showing off our new kits and gear motors, and shaking hands with a large number of our customers. Yeah, there weren't any "official" BEAM events, but we still had a good time running our Solarbotics-sponsored SolarSpeeder race, with the winner being 8(?) year old Devon Bateman (taking home […]
3D Printer Filament Inventory Summary
Updated for May 15, 2020The pickings are getting slim, but we've got more coming shortly. Should be here by the end of the month!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.