3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

February 5, 2014
Wednesday Links: Robot Light Painting, M...

Masking tape and storytelling! Calcium pills and Scandinavian gods! Stop signs and distant relatives. None of the above mentioned things are going to be featured in this post, although they are extremely noteworthy. But all the things in the universe are interconnected, so there's still a chance that this stuff will make sense for someone. […]

November 29, 2011
Ardweeny & Strandbeest Make An Exce...

So we've just released a ton of awesome little bundles for our Ardweenys, and you're thinking "Wow, what would I do with all those?". Well friend, why not build a Strandbeest with an Ardweeny for a brain? For those few who aren't familiar with a Strandbeest (or don't know it by name), they are the […]

October 28, 2015
Monday New Product: Grove Sensor, Joysti...

Grove - Loudness Sensor $7.68 Detect sound with this well-engineered Grove loudness sensor. Grove - Thumb Joystick $7.68 A handy Grove module thumb-joystick. Grove - 3 pin to Grove 4 pin converter cable $.588 Add your traditional 3-pin GVS (Ground / Voltage / Signal) device to a Grove plug. Grove - Servo Branch Cable $5.88 […]

May 10, 2006
Solarbotics SolarSpeeder competition

The Western Canadian Robot Games are close at hand (umm... this weekend!), and in response to popular request, we're cranking up the SolarSpeeder contest again! Ever built a Solarbotics SolarSpeeder? Bring it down to the games, enter at our booth (free!), and we'll run a SolarSpeeder target race. Aim your racer at a 10cm (4") […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart