Fun fact: Tomorrow is Good Friday. By default, that means for the other 51 weeks of the year we experience Bad Fridays. We're not quite sure what exactly makes them so undesirable per se, but because the chance to celebrate a Good Friday comes around so infrequently, we've got to act on it, dangit. So […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Pogo Pins are back!
After a long hiatus, our PP3 chisel-tip pogo pins are back! And it looks like they're here to stay, so no more drop-outs in supply. I know that we use them for robotics applications, but there's a lot of people using them for other electronics purposes. Now you can get them reliably, and in quantity, […]
The Arc Reactor Project
We needed all our superpowers for the Calgary Comic & Entertainment Expo this past weekend, so we decided to create our version of Arc Reactor for the team to wear at the show in order to augment the intelligence and add superhuman-level multitasking and learning capabilities (imagination is key at the Comic Expo).
Solar-powered hopping robots? It's been ...
Actually, it's been done, but not this nicely. Those guys at Ecole Polytechnique Fédérale de Lausanne (EPFL) have a nice report on their "microglider" project. They do some fine work! Bah. That picture is too small! Let's look at a BIG one! Ooo! And they have more big pictures here! This one is nice - […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.