Hi all! We've got a new revision of the Atmel Brainboard ready for you. It adds some more functionality, and removes the breadboard space to make it cleaner (but can be added back on via the expansion bus - will be announced shortly). Check it out!
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Battery Holder, Freeduino Bundles
Today I have something truly fantasmic to show you. If you have something in your mouth, you should swallow now. If you're standing, sit down. If you're in your car, buckle up. If your mouth is full while you're standing up in your car and browsing the internet to read this... I just hope the […]
Monday New Product: Teensy v3.2, Bracket...
PJRC Teensy USB Board, Version 3.2 $24.75 The Teensy USB Development Board is a complete USB-based microcontoller development system. Bracket Pair for Sharp Distance Sensors - Parallel $4.20 Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Parallel Bracket Pair for Sharp Distance Sensors - Multi-option $4.85 Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, […]
Aleph Objects (Lulzbot) is still alive! ...
Update: Additional information from the Loveland Reporter Herald We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units. We were disappointed we got the call a few months ago relating that Aleph was looking to shut […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.