We're very excited to announce these new "baby" versions of the popular GM2 and GM3 gearmotors. These junior versions offer a 120:1 gear reduction ratio, built-in safety clutch, and 146rpm with 20in*oz torque at 5V drawing onlyh 90mA (620mA at stall). Take a look at them in the motors section of our website! The new […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Holiday Closure
We'll be shut down for the Holiday long weekend this Friday July 1st. It's Canada-Day up here, but we will be open again July 4th. Happy Holiday, y'all!
New Items!
Besides introducing a whole new batch of Push-Pogopins (and their measurements) into the 'misc' category, we've just introduced our 'D2' Germanium Diode. This diode is pretty good - better than the 1N270 and 1N34 types, with a voltage dropout of only 0.36V at 50mA! We're not exactly sure what type it is, but since we […]
LMR Start Here Kit, Beetlebot Preorders
Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.