Here's our late and lame Friday post. It features one very lonely, depressed, and forgotten product from a week ago. But it blinks, so it can't be that sad, right? 5V RGB LED LPD8806 Stripxels (32 per meter) $35.00 These are very similar to the WS2801 RGB Stripxel, but feature the LPD8806 controller IC instead. […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
New Product, Holiday Hours and Shipping ...
So today we have a nest. And some other things, like a programmer. If you take the programmer you can program the cleaning wire nest and the code will travel through all the little coils and come out the other end all transformed and golden too. It's almost like enlightenment. And then it will suitable […]
MakerBEAM
Ok, besides being a conjunction of two things we really love (Make Magazine & BEAM Robotics), it also is an open-source hardware project that is about little "T-Beams". This project is using the "KickStarter" model of sponsorship. Ask for pledges for the projects, and if the minimum is met (and it has - yay!), the […]
U.S. Elections and Sumobots
For all of you politically inclined, here's the latest news on the U.S. election process. The results will be known tomorrow, but for now - the fight is on! These sumorobots are totally autonomous. "No Radio control and no preset behavior. Or lobbyists." - as the author of the video puts it.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.