Check out our circuits page for another neat one gleaned from our design notebooks. A dark-activated, chaotically activating, dual pummer. Ideal for lighting up...things!
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
Check out our circuits page for another neat one gleaned from our design notebooks. A dark-activated, chaotically activating, dual pummer. Ideal for lighting up...things!
We've got an inventory in of treads, cogs, and idlers that mate up with our GM2/3/8/9 gear motors! You wanna build a photovore or Herbie with attitude? Get at it! You may want to pay special attention to the GMTPkg tread deal. It includes a pair of GM2/3/8/0 style gear motors, so you're ready to […]
Fun fact: As I type this out, I'm doing so not while sitting at my desk, but sitting on it. I highly recommend you try it. Probably not very ergonomic, but hey. When the boss temporarily commandeers your chair, you gotta make do with what you got. So this week we have a few small […]
When it rains, it pours! We're addition to the IT position search (some good candidates BTW, thanks very much), we're now also looking for somebody to slide in behind the purchaser desk. Here's what the job entails: Watch stock levels (physical and in Quickbooks, because bits can't always be trusted over bytes), and reorder necessary […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.