3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

June 27, 2014
Friday New Product: LED Embers and Conne...

This is a random photograph of the sun the other day for attracting attention. Now, you can see what we got to offer this week: USB A Female DIP 90 $1.25 These type 'A' female USB connectors are the standard when it comes to connecting peripherals to your project. LED Embers - Pack of 6 […]

January 11, 2017
Heated Car Seat Teardown and Repair

Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh […]

September 11, 2001
Our sympathy...

Due to the horrific events happening in the USA, Solarbotics cannot guarantee delivery of Priority or Airmail orders for the immediate future. Our sincerest sympathy goes out to the victims of this brutal and cowardly attack. May time relieve you of your sorrow, and the attackers face their justice.

August 1, 2001
Push Pin Videos

We've had some requests on exactly what do the pushpins do. So, we added videos for two of them. Push Pin 1 (Masher Point) Push Pin 3 (Chisel Point)

1 10 11 12 13 14 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart