We have developed a quick little survey to help us find out a few things from our visitors, and we hope you won't mind giving us your thoughts. In exchange for a little bit of your time, we will be entering your name into a draw for our newest product up on deck -- the […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Arduino Shields
As we all know, the 'A' in 'August' stands for 'Arduino'. So it's with great sorrow that this will be our last mega Arduino-centric update. We'll still be adding to our selection, but not in as massive amounts. The Arduino Components category is still rather sparse, so hopefully that'll see some love soon. But in […]
Having Online Order Difficulty?
If you've been having any problem whatsoever with our online orderform, would you be so kind to fire us a quick message about it? We're trying to isolate a problem we're hearing about, but cannot reproduce, especially with the final "submit" button. A copy/paste of the error message to us would be greatly appreciated...
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.