Eric L. was so kind as to send us a link to a video of his Make 06 Trimet on YouTube. If you want to build your very own Trimet you can get all the parts here, and if you don't have the magazine, you can buy it here. Order both together and get 10% […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Starry Night Pendant Assembly Guide
We've already blogged about the Technology Grad Dresses, which are accompanied by the Starry Night Pendant as a perfect finishing touch to complete the outfit. Since then, we've upgraded and improved the Pendant design to make it a fully documented kit, rather than just a bundle: The 2xAAA battery holder offers longer life, less cost […]
From the Inbox...
It's always nice to get feedback (especially when it's complementary!): I have to let you know about my experience with your company this Christmas season. I wanted to purchase a robotic kit for my husband who had never build a kit before. I called to get some information as I am very much a novice, […]
New Product and Day Off
It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday. LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.