In our continuing quest to find the successor to the Sunceram throne, we invite you to welcome the SCC2433a solarcell! It's the little brother to the SCC3733, with similar polycrystalline & epoxy construction. It's quite the power-house in direct sunlight, but be warned - the cell arrangment is skewed in favour of current generation, not […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
The Solar Marble Machine
... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!): Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered […]
Project: Switching Beds for a Better Cut
We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are […]
Scheduled Website downtime
I suppose the Internet tubes need cleaning once in a while... Our ISP is scheduling some downtime for upgrades on January 27, 09:00-12:00 UTC (that's 2am to 5am Mountain time here where Solarbotics is). Sorry for the hiccup!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.