3D Printed Treetop Star

Solar botics
December 9, 2014

Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.

After some trial and error (due to the Slicer not cooperating)...

...we printed a whole forest of perfect wintery spiky star-ends.

And, well, we just had to have someone live there for a bit. In this case, a snowman:

 

 

 

 

 

 

 

 

Our  addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..

..to fit the LED's domed part:

   

And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!

 

 

And here's the final product, ready to light up our office with wonderful glowing lights!

 

 

 

MORE POSTS

May 22, 2012
Reset Addresses

Hey everyone, just a quick heads-up - there's was a bit of a technical hiccup with some account data, so we've had to clean out any stored addresses. We just know how much fun it is to type it in again, but fortunately any address that's used with an order will automatically get saved to […]

May 17, 2001
Review of the Scoutwalker II

Nuts and Volts author Robert Nansel has reviewed our SW2 kit and has written up an excellent review. You can get a sample magazine from the Nuts and Volts website or search their distributers page for where you can get the magazine. Check out the add on page 53 for our add, as well as […]

March 26, 2020
Active Tech Mail-Out and COVID-19 Polici...

Hey Everyone, Sometimes the stars align and everything goes right... however, this was not the case for our recent sales flyer. Despite our best efforts to cancel/delay/time travel, it was sent out to the local Calgary area today. While we are still honoring the sale (with an extension until April 12th while supplies last), we […]

June 30, 2006
Oh Canada!

We are closed on Monday, July 3rd in lieu of Canada Day this Saturday (July 1st)! We will be back in business July 4th. Happy Canada Day!

1 9 10 11 12 13 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart