If you came to the BEAM/WCRG Millennium Games in Calgary last summer, you may have seen Jeff de Boer's lecture on the aesthetic component of robotics. Jeff is a local Calgary artist (recently inducted to the Royal Canadian Order - a huge honor, considering his age), and was interviewed on CBC radio Monday with Shelaugh […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Eastern Canadian Robot Games Results
Yes, the Eastern Canadian Robot Games have been over for about a month, but I still think the following is worth mentioning: The Solarbotics Sumovore won first place in beginner mini-sumo The Solarbotics ScoutWalker III won first and third in the Walker competition Our own Grant McKee won Advanced Minisumo with his own design "Ender's […]
SunSwinger Documentation online
We just got the PDF documentation up for the SunSwinger, so you'll see it listed as a resource under the SunSwinger product info page. Hope you all enjoyed April Fool's. The Spazovore was only a partial joke - anybody who ordered one will be receiving one!
New RoboRapter/RS2 info!
Just got a note from Chance "knitsu" Brown, who's got a new flurry of RoboSapien & Roboraptor stuff on his website. Take a boo here! Oh, did I forget to mention RoboRaptoronline?
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.