We love SparkFun. Great group of people. Excellent products. It's just that they're... well... twisted and cruel. You see their RoboJoust event? We didn't take them serious when they said it was to be performed 4' off a concrete floor. But here's the proof. They're actually building the table that high off the ground. Next […]
3D Printed Treetop Star
Solar botics
December 9, 2014
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own.
After some trial and error (due to the Slicer not cooperating)...
...we printed a whole forest of perfect wintery spiky star-ends.
And, well, we just had to have someone live there for a bit. In this case, a snowman:
Our addressable 5mm LEDs were well suited to light this contraption. We drilled a hole in the bottom of each spike..
..to fit the LED's domed part:
And then wired everything up. It wasn't pretty but the WS2812 LED that we used made it much easier than a conventional RGB LED: rather than 3 separate channels, the WS2812 LED only has a data in and data out. Chain them all together and they work like a charm!
And here's the final product, ready to light up our office with wonderful glowing lights!
MORE POSTS
Sumovore gets 'Best Engineered' Award at...
Solarbotics came back from the 2003 Seattle Fall Robothon with a 'Best Engineered' award for our Sumovore Mini-sumo kit! We'll get a picture of it up online shortly, but in the meanwhile, take a boo at our pictures of our trip there! Read More...
Sumovore code online
Hey!?! Didja know we didn't have a link to the BS2 code for the Sumovore BS2 add-on board? Well, we did, but it was on the news posting, not the BS2 adapter board page (it does now!). Grant did a great job setting up framework for a great dual-purpose BS2-controlled Sumovore. Set it down on […]
Its a boy!
Congratulations go out to Dave and Cheryl for the birth of their new baby, Dason. Dason was born September 11, 2002 at 4:16 AM weighing in at 9 pounds 14 ounces.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.