For the past few months we've had bundles for many of the PICAXE project boards. They come with cables and a battery holder, and are generally what you need if you're getting started in this kind of stuff for the first time. But what if you already have all those fun appetizers on the side, […]
3D Printed frame for Line Follower
Dave Hrynkiw
November 17, 2009
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!).
LOVE open source hardware!
MORE POSTS
Tuesday New Product: Batteries, Pi Wedge...
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! 3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. SparkFun Pi Wedge B+ $9.55 A prototyping Wedge for Raspberry Pi B+ that allows you to use a shield and a protoboard […]
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
BEAM Workshop in Chile!
From a post we just received from Roberto Avil
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.